Visara CCA-3074 Planning Guide - Manual (Page 47)

CCA-3074 Planning
707159-002 4-3
Notes:
1. EMIF is used to allow both CNTLUNITs to share the same path (1E).
2. The CNTLUNIT macros do not include the CUADD parameter, and the default
value of “0” is assumed.
3. EMIF only allows LPARs within the same LCSS to share a channel. If multiple
LCSS’ are in use on a single mainframe, then an ESCON channel from each LCSS
in use is required.
4. Up to 15 LPARs can be configured to share a single EMIF channel from the host.
5. The Device Candidate List in HCD is used to specify which LPARs are accessing
each CU.