Visara CCA-3074 Planning Guide User Manual

Page 36

Text mode
Original mode

Chapter 3. Host Gens –OS/390 with HCD

3-8

707159-002

HCD Panel 14

Selecting option S on panel 12, you come to the panels showing the
control units defined for the LPAR. Note the control unit type of
“3174” used for the CCA-3074. Also note the format of the Channel
Path ID (defined on HCD panel 13) and Link Address (ESCON
Director port being used - as listed on HCD panel 5).

HCD Panel 15

Select option U on panel 12. The panel above shows the IO Devices
(consoles) that are defined to control unit 1F00 from the HCD Panel 14.
Notice the column labeled Access Allowed. This would be a NO if
access to this LPAR is turned off in the IO Device Candidate List.
(1F00-1F07 corresponds to the 00-07 Device Low-High range in the