Visara CCA-3074 Planning Guide - Manual (Page 54)

Chapter 4. IOCDS Sample Definitions
4-10 707159-002
EXAMPLE 6 – Multiple LCSS and FICON
This example is the same as the last one except the connection to the
CCA-3074 is through FICON instead of ESCON. All of the LPARS are
on a single CPU that has two Logical Channel Subsystems (LCSS). A
FICON switch is used, and a single FICON cable is run into the switch
from each LCSS to which in turn is connected to the switch through a
single FICON cable. Users on the CCA-3074 can have sessions on any
or all of the 4 LPARs shown. Up to 16 LPARs can be supported
through a single FICON interface to the CCA-3074.
LPAR390B TEST2
43
MIF
LPAR390 TEST1
1F
MIF
SWITCH 04
C4
A1 19
CCA-3074
LCSS0 LCSS1