Verilink WANsuite 6x30 (34-00315.B) Product Manual - Manual (Page 92)

3-64 W A N s u i t e 6 x 3 0
DHCP Hosts Screen
In some cases, it may be necessary to provide an IP station with a specific
DHCP server name, which may be used by the IP station when making a
DHCP request. That name is included on the DHCP Hosts screen (Figure
3.63), which identifies the DHCP server sending DHCP packets. This
parameter is configured on the DHCP Hosts Details screen accessed by
clicking on an “Index” number.
Figure 3.63 DHCP Hosts Screen
H ost N a m e The name of the DHCP Server. Default is none.
The DHCP Hosts screen provides the following user-activated buttons:
NOTICE: You must Save and Restart for the new Server name to become active.
Static Entries Screen
The Static Entries screen (Figure 3.64) lists static IP addresses associated with
MAC addresses. This ensures that the same IP address will always be used for
a given PC provided its MAC address is known. These parameters are
configured on the Static Entries Details screen accessed by selecting a number
from the “Entry Index” column.
IP Address Status Table Displays DHCP Server statistics.
Refresh Refreshes data on the current page.
Button Function
Button Function
DHCP Details Returns the user to the previous screen.
Add New Adds a new Server name.
Refresh Refreshes data on the current page.