Verilink WANsuite 6x30 (34-00315.B) Product Manual - Manual (Page 77)

W e b S e r v e r I n t e r f a c e 3-49
C ost Cost of using that route.
Values: 0
−
65535
Default: 1
R o u te S ta tu s Indicates whether or not the current route is enabled.
Values: Enable, Disable
Default: Enable
The Route Details screen provides the following user-activated buttons:
Dynamic Route Table Screen
Access this menu by clicking on “Dynamic Route Table” on the Static Routes
menu. This table shows both dynamic and static routes. Please note that not
all parameters are necessarily defined, depending on whether or not the routes
were learned dynamically. Primarily, the most useful information is included
in "Destination," "Interface Index," and "Mask" columns.
Figure 3.46 Dynamic Route Table Screen
D estin atio n Network to be reached.
If N d x Interface internal number.
N ex t H o p IP address used to reach the destination network.
Typ e Direct or Indirect.
P ro to co ls Local
A ge 0
Button Function
Submit Sets any values that have been changed.
Static Route Table Returns you to the previous screen.
Delete Route Deletes the route currently displayed.
Refresh Refreshes data on the current page.