Verilink WANsuite 6x30 (34-00315.B) Product Manual - Manual (Page 42)

3-14 W A N s u i t e 6 x 3 0
Figure 3.11 Configuration Profiles Screen
The table on this screen displays the following information for each available
Span Configuration Profile:
S p a n C on fig P rofile
N a m e
Name of the defined span configuration profile.
S p a n W ire In terfa ce Type of wire interface used by the span.
S p an M in L in e R ate Minimum attainable line rate in the span.
S p an M ax L in e R ate Maximum attainable line rate in the span.
S p a n R em o te E n a b led Indicates whether the option to span remote is enabled or disabled.
S p a n C on fig
Tra n sm issio n M od e
Regional setting of the span. The possible settings are Annex-A (ITU-T
G.991.2), Annex-B (ITU-T G.991.2).
In addition to the table, this screen has a “Configuration Profile Details”
button. Clicking on this button will display additional detailed information on
a selected configuration profile. This screen is described in more detail in the
paragraphs below.
Select the particular profile for which you want to see details by clicking on
the radio button beside the Span Config Profile Name on the Configuration
Profiles screen and then clicking on the “Configuration Profile Details”
button. The Configuration Profile Details screen (Figure 3.12) supports the
overall configuration of the spans.