Verilink WANsuite 6x30 (34-00315.B) Product Manual - Manual (Page 64)

3-36 W A N s u i t e 6 x 3 0
Address, and IP Port by which the IP traffic is filtered. In addition, this table
shows the Tx Alarm Threshold and the current Tx Alarm status (if enabled)
for each rule.
Figure 3.33 Service Aware Screen
The Service Aware screen provides the following user-activated buttons:
Rule Config Screen
Use the Rule Config screen (Figure 3.34) to establish Service Aware
parameters. To establish a rule, select the desired rule configuration options,
provide the appropriate filter information where required, and click on the
“Submit” button at the bottom of the screen.
Button Function
Rule Details Displays the Rule Configuration screen (page 3-36).
Traffic Meter Stats Displays the Traffic Meter Statistics screen (page 3-38).
Clear Alarms Clears all Service Aware alarms.
Refresh Refreshes data on the current page.