Verilink WANsuite 6x30 (34-00315.B) Product Manual - Manual (Page 155)

V T 1 0 0 I n t e r f a c e 4-57
destination address different from the global/Internet network address will be
processed by the IP Gateway, and may be routed to another port. If this
parameter is set to “Disable,” no packet with a destination address different
from the global/Internet address will be processed. Setting this parameter to
“Disable” will override an “Enable” parameter set under “Filter Non Local
Address” on the NAT Details menu.
Typ e Defines whether this port is local or global. Default is LAN global. All others
are local.
IP A d d ress IP Address of this port. Default is the value defined in the IP Gateway Circuit
Table.
M a sk Mask related to the defined IP Address. Default is the value defined in the IP
Gateway Circuit Table.
E n d p oin t The Endpoint name of the circuit associated with the LAN or WAN port.
Default is LAN for the first port.
Figure 4.54 NAT Port Details Screen
You can delete a NAT Port by selecting the “Delete” prompt or you can
display the NAT Port Status Table (Figure 4.55) by selecting the “Status”
prompt. This table displays for each port the processed packets from specific
IP addresses.
Figure 4.55 NAT Port Status Table Screen
IP A d d ress Original IP Address of the host.