Shelf and slot parameters, Hdm 2182 card administration – Verilink HDM 2182 (880-502925-001) Product Manual User Manual
Page 52

HDM 2182 Management: Using NCM 2000
4-4
Verilink HDM 2182 User Manual
Table 4-1
HDM 2182 NCM Controller Menu Commands
Shelf and Slot Parameters
When accessing the HDM 2182 via the NCM Module, this will always
be the first option to be chosen before any parameters on the HDM
2182 can be monitored or modified. Once the shelf/slot address for
the HDM 2182 has been selected from the Main Menu and the
screen is refreshed by pressing the E
NTER
key, the Main Menu’s
prompt will display the shelf/slot address of the HDM 2182.
Table 4-2
Shelf and Slot Parameters
HDM 2182 Card Administration
Once the shelf/slot address for the HDM 2182 has been selected
from the Main Menu and the screen is refreshed by pressing the
E
NTER
key, the Main Menu’s prompt will display the shelf/slot
address of the HDM 2182. Selecting the command O from the Main
Menu will display the Card Administration Submenu.
Command
Description
S
Shelf/slot: Using this command, you can navigate from one card to another. Table 4-2
O
Administration, Figure 4-2, Table 4-3.
C
Configuration, Figure 4-3, Table 4-4.
D
Diagnostics, Figure 4-7, Table 4-8.
P
Performance/status, Figure 4-13, Table 4-11.
F
Display far end DS3 port identification, Figure 4-20.
A
Alarm, Figure 4-18.
B
Circuit manager—This option is not used with the HDM 2130. For more information on this
option, see the NCM manual.
R
Remote end setup, Figure 4-6, Table 4-7.
I
Manufacturing info—Displays the firmware and hardware version information for the
appropriate card, Figure 4-21.
X
Exit this menu and log out.
Command
Description
Options
S
Shelf: Use this field to select the shelf containing the HDM 2182 you want
to access.
0-4
Slot: Use this field to select the slot containing the HDM 2182 you want
to access.
1-13 (Multi-line)
1-5 (Quint-line)
1-2 (Dual-line)