Verilink HDM 2182 (880-502925-001) Product Manual - Manual (Page 29)

Standalone HDM 2182 Management
Verilink HDM 2182 User Manual 3-7
Port Configuration Menu
Once you have established and set the HDM 2182’s IP addresses
and other administrative parameters, the HDM 2182’s ports need to
be configured before signals can be properly transmitted and
received.
From the Main Menu choose C to display the Port Configuration
Menu.
Figure 3-3 Port Configuration Menu
Table 3-3 Port Configuration Menu Choices
DS3 Network
Port
Configuration
Submenu
From the Port Configuration Menu, select D for the DS3 Port
option to display the DS3 Network Port Configuration Menu.
B DS3 Boot—Causes the HDM 2182 to re-boot from the selected partition.
HDM > b
Current Booting Flash Partition: B
Enter 1) Partition A 2) Partition B) >
X exit menu—Returns you to the Main Menu , Figure 3-1.
Command Description
Command Description
D DS3 Port—displays the DS3 Network Port Configuration Submenu ,
Figure 3-4, Table 3-4.
H or I HSSI Port—displays the HSSI (A or B) Port Configuration Menus , Figure
3-5, Table 3-5.
X exit menu—Returns you to the Main Menu , Figure 3-1.
--- PORT CONFIGURATION MENU --- --- PORT CONFIGURATION MENU --- --- PORT CONFIGURATION MENU --- --- PORT CONFIGURATION MENU ---
D) DS3 Port
D) DS3 Port D) DS3 Port D) DS3 Port
H) HSSI Port A
H) HSSI Port A H) HSSI Port A H) HSSI Port A
I) HSSI Port B
I) HSSI Port B I) HSSI Port B I) HSSI Port B
X) exit menu
X) exit menu X) exit menu X) exit menu
HDM >
HDM > HDM > HDM >