Verilink HDM 2182 (880-502925-001) Product Manual User Manual
Page 28
Standalone HDM 2182 Management
3-6
Verilink HDM 2182 User Manual
M
Management trap IP address1—This is an IP address to which alarm messages will be sent.
This might be a copy of the Verilink Node Manager application or some other SNMP network
manager.
HDM > m
Management Station #1 Trap IP address: 0.0.0.0,
New Trap IP address >
O
Management trap IP address2—This is an alternate IP address to which alarm messages will
be sent. This might be a copy of the Verilink Node Manager application or some other SNMP
network manager.
HDM > o
Management Station #2 Trap IP address: 0.0.0.0,
New Trap IP address >
P
Management trap IP address3—This is an alternate IP address to which alarm messages will
be sent. This might be a copy of the Verilink Node Manager application or some other SNMP
network manager.
HDM > o
Management Station #3 Trap IP address: 0.0.0.0,
New Trap IP address >
Q
Management trap IP address4—This is an alternate IP address to which alarm messages will
be sent. This might be a copy of the Verilink Node Manager application or some other SNMP
network manager.
HDM > o
Management Station #4 Trap IP address: 0.0.0.0,
New Trap IP address >
C
Community String - read—A security feature that enables you to establish who may read the
information on the HDM module. Default is “public”. You may set a different string up to 64
characters.
HDM > c
Community string (Read): public Change (Y/N)? y
Please enter new Read Community String (64):
W
Community String - write—A security feature that enables you to establish who may write or
change the information on the HDM module. Default is “public”. You may set a different
string up to 64 characters.
HDM > w
Community string (Write): public Change (Y/N)? y
Please enter new Write Community String (64) :
F
DS3 flash download—Writes a firmware upgrade to Flash RAM after it has been transferred
to the HDM 2182 using FTP.
HDM > f
Current Booting Flash Partition: B
Only Partition B can be upgraded.
Do you really want to do so? !!! (Y/N)
Command
Description