Verilink HDM 2182 (880-502925-001) Product Manual - Manual (Page 24)

Standalone HDM 2182 Management
3-2 Verilink HDM 2182 User Manual
Figure 3-1 ASCII Screen: Main Menu via HDM 2182 Local Port
Table 3-1 HDM 2182 Craft Interface Menu Commands
Command Description
P Performance—displays the Performance Monitoring Menu . Figure 3-9, Table 3-9.
D Diagnostics—displays the Diagnostics Menu . Figure 3-6, Table 3-6.
C Port Configuration—displays the Port Configuration Menu , Figure 3-3, Table 3-3.
O Node Administration—displays the Administration Menu , Figure 3-2, Table 3-2.
B Restore Manufacturing Default Config—displays the Restore Manufacturing Default
Config Menu , Figure 3-17, Table 3-11.
R Monitor Alarms—displays the Alarm Monitoring display that provides real-time alarm
notification, Figure 3-18.
A View Alarm Buffer—displays the Alarm Buffer that provides a historical record of alarms up
to the time of selection, Figure 3-19.
-- VERILINK HDM 2182 CRAFT INTERFACE at[1,1]: FW Rev 3.3, May 12, 1997 -- -- VERILINK HDM 2182 CRAFT INTERFACE at[1,1]: FW Rev 3.3, May 12, 1997 -- -- VERILINK HDM 2182 CRAFT INTERFACE at[1,1]: FW Rev 3.3, May 12, 1997 -- -- VERILINK HDM 2182 CRAFT INTERFACE at[1,1]: FW Rev 3.3, May 12, 1997 --
Physical Address : 08:11:33:55:77:99 Physical Address : 08:11:33:55:77:99 Physical Address : 08:11:33:55:77:99 Physical Address : 08:11:33:55:77:99
Ethernet Local IP Address : 192.94.46.83
Ethernet Local IP Address : 192.94.46.83 Ethernet Local IP Address : 192.94.46.83 Ethernet Local IP Address : 192.94.46.83
Gateway IP Address : 0.0.0.0
Gateway IP Address : 0.0.0.0 Gateway IP Address : 0.0.0.0 Gateway IP Address : 0.0.0.0
Ethernet Subnet Mask : 0.0.0.0
Ethernet Subnet Mask : 0.0.0.0 Ethernet Subnet Mask : 0.0.0.0 Ethernet Subnet Mask : 0.0.0.0
Node Address : 127.255.255.0
Node Address : 127.255.255.0 Node Address : 127.255.255.0 Node Address : 127.255.255.0
ACP Backplane Bus : C
ACP Backplane Bus : C ACP Backplane Bus : C ACP Backplane Bus : C
ACP Inband : Disabled
ACP Inband : Disabled ACP Inband : Disabled ACP Inband : Disabled
Loopback Status :
Loopback Status : Loopback Status : Loopback Status :
--- MAIN MENU --- --- MAIN MENU --- --- MAIN MENU --- --- MAIN MENU ---
P) performance P) performance P) performance P) performance
D) diagnostics
D) diagnostics D) diagnostics D) diagnostics
C) port configuration
C) port configuration C) port configuration C) port configuration
O) node administration
O) node administration O) node administration O) node administration
B) restore manufacturing default config
B) restore manufacturing default config B) restore manufacturing default config B) restore manufacturing default config
R) monitor alarms
R) monitor alarms R) monitor alarms R) monitor alarms
A) view alarm buffer
A) view alarm buffer A) view alarm buffer A) view alarm buffer
W) change craft password
W) change craft password W) change craft password W) change craft password
T) change craft timeout length
T) change craft timeout length T) change craft timeout length T) change craft timeout length
X) system log off
X) system log off X) system log off X) system log off
HDM > HDM > HDM > HDM >
Menu Heading Area
Command/Data Entry Area
Command List
Module Status