Table 3-11 – Verilink HDM 2182 (880-502925-001) Product Manual User Manual
Page 46

Standalone HDM 2182 Management
3-24
Verilink HDM 2182 User Manual
Table 3-11 Restore Manufacturing Default Config Menu Options
Command
Description
A
TX Diagnostic Alarms—Sets the transmission of diagnostic alarms to the manufacturing
defaults.
HDM > a
Set TX Diagnostic Alarms to Manufacturing Default? (Y/N) >y
TX Diagnostic Alarms value is set to Default.
System could be in Unknown State. Please REBOOT the board!!
D
Day Alert Thresholds—Sets the 24-hour day alert thresholds to the manufacturing defaults.
HDM > d
Set Day Alert Thresholds to Manufacturing Default? (Y/N) >y
Day Alert Thresholds value set to Default.
System could be in Unknown State. Please REBOOT the board!!
Q
Qrt. Hr. Alert Thresholds—Sets the quarter hour (15-minute) thresholds to the
manufacturing defaults.
HDM > q
Set Qrt. Hr. Alert Thresholds to Manufacturing Default? (Y/N) >y
Qrt. Hr. Alert Thresholds value set to Default.
System could be in Unknown State. Please REBOOT the board!!
P
DS3 Port Configuration—Sets the DS3 Port Configuration to the manufacturing defaults.
HDM > p
Set DS3 Port Configuration to Manufacturing Default? (Y/N) >y
DS3 Port Configuration value set to Default.
System could be in Unknown State. Please REBOOT the board!!
S
SNMP Configuration—Sets the SNMP Configuration to the manufacturing defaults.
HDM > s
Set SNMP Configuration to Manufacturing Default? (Y/N) >y
SNMP Configuration value set to Default.
System could be in Unknown State. Please REBOOT the board!!
H
HSSI Port A & B Configuration—This option sets the HSSI Ports A and B Configurations to
the manufacturing defaults.
HDM > h
Set HSSI Port A & B Configuration to Manufacturing Default? (Y/N) >y
HSSI Port A & B Configuration value is set to Default.
System could be in Unknown State. Please REBOOT the board!!
X
exit menu—Returns you to the
Main Menu