Tri Tool 604SB Clamshell - Manual (Page 69)

69
Model 604SB thru 612SB, Clamshells
92-1197 : Rev. 131230
ACCESSORIES
The following accessories for the Model 600SB Clamshells are available from
Tri Tool INC.
• Portable Air Filter (P/N 75-0115)
A Filter/Regulator/Lubricator (FRL) is required to protect the warranty on all Tri Tool INC
air driven tools.
• Counterboring Module Kit-CBM-2 (P/N 05-0116)
• Counterboring Module Kit, CBM-3 (P/N 05-0405)
• Tool Bits (Refer to section on Tool Bits)
• Tool Blocks (Refer to section on Tool Blocks)
• Clamping Pad Sets (Refer to section on Clamping Pads)
• Air Motor, 1.5 HP (P/N 57-0072
• Air Motor, 2.25 HP (P/N 57-0162)
• Air Motor, 3.0 HP (P/N 57-0163)
Use A Heavy Duty Motor is recommended for use when beveling carbon steel pipe
with a wall thickness greater than .75” (19.1 mm) or when
beveling stainless steel pipe with a wall thickness greater than .50” (12.7 mm)
(See specifications for motor selection)
• Electric Drive Kit, 110V (Milwaukee) (P/N 05- 0123)
• HD, Electric Drive Kit, 115V (Unitec) (P/N 05-0434)
• HD, Electric Drive Kit, 230V (Unitec) (P/N 05-0414)
• Hydraulic Drive Kit (P/N 05-0358)
• Reverse Drive Housing Kit (P/N 05-0127)
• Repair Kit (P/N 05-0135)
(For the Standard Tool Module (P/N 08-0037))
• Repair Kit (P/N 05-0136)
(For the Extended Tool Module (P/N 08-0040))