Tri Tool 604SB Clamshell - Manual (Page 6)

6
TRI TOOL INC.
92-1197 : Rev. 131230
GENERAL DESCRIPTION
The Model 600SB Low-Profile Clamshell is a split-frame pipe lathe designed for
severing and beveling in-line pipe with minimal radial and axial clearance.
Using Low Profile or Extended Tool Blocks the Model 600SB may be configured to
perform the following operations:
Sever in-line pipe.
Sever and bevel in-line pipe.
Sever and double bevel in-line pipe.
DESIGN AND OPERATION FEATURES
The easily adjustable precision bearing surfaces pre-load and stabilize the rotating
head to provide long life, low maintenance, stability, and precision.
The Clamshell splits into two halves for mounting on closed loop systems.
All parts are secured to the two halves, thus avoiding the loss of parts and at the
same time providing maximum ease of handling.
The Clamshell may be equipped with self-centering Clamping Pads for quick, easy
mounting or may be equipped with Adjustable Clamping Pads for out-of-round pipe
conditions.
Dual Tool Blocks with Auto-feed Sprockets and Adjustable Slides provide maximum
maintainability, life, and operator safety, with a minimum of operator training.
The Auto-feed Sprockets provide .003” (.08 mm) of radial feed per revolution of the
Headstock for a controlled depth of cut.
The drive gears and bearing surfaces are covered for operator safety and are sealed
to provide protection from dust and chips.
The operator’s controls are located away from the rotating Headstock for the
operator’s safety.
A modular design concept provides quick, easy maintenance and maximum
versatility in the drive and tooling options.
A detachable right angle Air Motor provides maximum handling ease and low axial
clearance.