Tri Tool 604SB Clamshell User Manual
Page 20
20
TRI TOOL INC.
92-1197 : Rev. 131230
NOTE:
LUBRICANT RECOMMENDATIONS
The Drive Gears require a high string lubrication grease such as “Chevron Utility
Grease, light, high string for gears” (P/N 68-0020 - 1 qt.) or (P/N 68-0015 - 5 gal.).
The Slide Rails and Tool Blocks require a light oil such as SAE 10 light machine oil.
The Feed Screw for the Tool Block and the Tripper Block Assy require a SAE 10
light machine oil for normal conditions, and under dusty conditions a silicone,
graphite or molybdenum disulfide ‘dry’ lubricant.
If you use a light film of all purpose grease, check it frequently for grit
contamination.
The Air Motor requires a Class 2 lubricant, viscosity of 100 to 200 SSU at
100° F (38° C) minimum aniline point of 200° F (93° C).
Tri Tool Inc. – Air Tool Lubricant (P/N 68-0022)
AMOCO – American Industrial Oil no. 32
Atlantic Richfield – Duro Oil S-150
Chevron – A.W. Machine Oil 32
Exxon – Nuto H32
Shell – Tellus Oil 32
The bearings in the Air Motor are sealed and do not require any lubrication.