Tri Tool 604SB Clamshell - Manual (Page 27)

27
Model 604SB thru 612SB, Clamshells
92-1197 : Rev. 131230
After the sever is complete, reposition the Bevel Tool Bit so that it continues cutting
until the desired land thickness is obtained.
SOCKET WELD REMOVAL
Install the Tool Bit in the Socket Weld Tool Holder (Optional) as show. See the
picture below.
When the Tool Bit first cuts the parent metal, stop the machine and retract the Tool
Holder.
Strike the pipe end and twist it out of the socket.
If the pipe will not separate from the socket, then continue cutting.
Tool Bit Adjustment
Socket Weld Removal