Tri Tool 604SB Clamshell - Manual (Page 65)

65
Model 604SB thru 612SB, Clamshells
92-1197 : Rev. 131230
Unitec Motor* Summary - Maximum Wall Thickness for Continuous Duty
*Applies to Unitec Model EBH 32/2.2 110VAC & 220VAC (58-0165 & 58-0189 base part numbers)
Pipe
Size
604SB 606SB 608SB 610SB 612SB
2" 0.84 inch
3" SCH 160
(.438")
4" SCH 120
(.438")
SCH 160
(.531")
5" SCH 40
(.258")
SCH 80
(.375")
6" SCH 40
(.280")
SCH 40
(.280")
8" SCH 20
(.250")
SCH 60
(.406")
10" SCH 40
(.365")
SCH 40
(.365")
12" SCH 30
(.330")
14"
For reference only: this data is calculated from test results in a controlled
environment on carbon steel pipe, sever and single 37 degree bevel with
high speed tooling, and without the use of coolant. Actual environment, pipe
material, tooling, and operating conditions will impact motor performance..
Unitec Motors/Kits
Model 110V 220V
604-612SB 05-0434 05-0414