Teac UH-7000 - Manual (Page 28)

28
TASCAM UH-7000
7 – Application Guide
Windows 8 and Windows Media Player
1. Quit all applications and right-click the Start screen and then
click the All apps button that is at the bottom right of the
screen to open the Apps screen.
NOTE
In Windows 8.1, click the x icon that appears at the bottom
right of the start screen.
2. Click Control Panel.
3. Click “Hardware and Sound”, and then open the “Sound”
window.
4. On the Playback page, right-click “Speakers TASCAM
UH-7000”, and click “Set as Default Device” in the pop-up
menu that appears.
When you do this, the green check mark (4) appears next to
Speakers TASCAM UH-7000.
NOTE
To use this unit as the recording device, open the Recording
page and use Set as Default Device for Line In TASCAM
UH-7000.
5. After completing the setting, click the OK button.
6. Launch Windows Media Player, select an audio file and start
playback.
NOTE
• If you change the setting while Windows Media Player is
running, the software will not recognize that the device has
been changed. In this case, restart Windows Media Player.
• If you still cannot hear sound after making the settings and
completing the procedures above, restart the computer.
• If you make this setting, sound will be output through
this unit, but no sound will be output from the computer’s
speakers or headphone jack.
• By default, the mixer pan settings are set to the center (C).
For this reason, sounds playing back will be heard as mono.
Adjust the built-in mixer settings as necessary. (See “MIXER
page” on page 17.)
• If you want the Windows Media Player output to be output
from this unit's DIGITAL (AES/EBU) OUT connector without
being affected by the mixer functions, on the MIXER page of
the Mixer Panel, select the Computer 1 and 2 button in the
DIGITAL OUTPUTS SELECT section.
Mac OS X and iTunes
1. Open the Utilities folder within the “Applications folder”,
and double-click “Audio MIDI Setup”. Then open the “Audio
Devices” window.
2. Click “UH-7000” to select it and right-click or control-click it.
Then, click “Use this device for sound output” in the pop-up
menu.
The speaker mark appears next to UH-7000.
NOTE
To use this device as the recording device, select “Use this
device for sound input” for the “UH-7000’.
3. Launch iTunes, select an audio file and start playback.
NOTE
If you want the iTunes output to be output from this unit's
DIGITAL (AES/EBU) OUT connector without being affected
by the mixer functions, on the MIXER page of the Mixer
Panel, select the Computer 1 and 2 button in the DIGITAL
OUTPUTS SELECT section.
Audio MIDI Setup in OS X Mavericks
(10.9.1)
In OS X Mavericks (10.9.1), this unit will appear as two devices
in the Audio Devices window: “UH-7000 (Bit Accurate)” and
“UH-7000 (Core Audio)”. The “UH-7000 (Bit Accurate)” device,
however, cannot be used for input or output. Use the “UH-7000
(Core Audio)” option.
NOTE
• When you can select “UH-7000 (Bit Accurate)” in a DAW or
other application, it will enable recording and playback that
is even more stable.
• The “UH-7000 (Bit Accurate)” option cannot be used with
applications downloaded from the Mac App Store. For these
applications, use the “UH-7000 (Core Audio)” option.