Teac UH-7000 - Manual (Page 27)

TASCAM UH-7000
27
7 – Application Guide
In this chapter, we explain how to set some audio applications
for use with this unit.
8 DAW software
The ways that settings are made differ among DAWs.
When using a DAW, consult its operation manual.
Windows XP and Windows Media
Player
1. Quit all applications and open Control Panel from the Start
menu.
2. Open the “Sounds and Audio devices Properties” screen.
NOTE
If you do not see this item, click Sounds, Speech and Audio
Services to make it appear.
3. Click the “Audio” tab to open the “Audio” page.
4. Set the “Sound playback” “Default device” to “TASCAM
UH-7000”.
NOTE
To use this unit as a recording device, set the “Sound
recording” “Default device” to “TASCAM UH-7000”.
5. After completing the setting, click the OK button.
6. Launch Windows Media Player, select an audio file and start
playback.
NOTE
• If you change the setting while Windows Media Player is
running, the software will not recognize that the device has
been changed. In this case, restart Windows Media Player.
• If you still cannot hear sound after making the settings and
completing the procedures above, restart the computer.
• If you make this setting, sound will be output through
this unit, but no sound will be output from the computer’s
speakers or headphone jack.
• By default, the mixer pan settings are set to the center (C).
For this reason, sounds playing back will be heard as mono.
Adjust the built-in mixer settings as necessary. (See “MIXER
page” on page 17.)
• If you want the Windows Media Player output to be output
from this unit's DIGITAL (AES/EBU) OUT connector without
being affected by the mixer functions, on the MIXER page of
the Mixer Panel, select the Computer 1 and 2 button in the
DIGITAL OUTPUTS SELECT section.
Windows 7 and Windows Media Player
1. Quit all applications and open the Control Panel from the
Start button menu.
2. Open “Sound”.
NOTE
If you do not see this item, click Hardware and Sound.
3. On the Playback page, right-click “Speakers TASCAM
UH-7000”, and click “Set as Default Device” in the pop-up
menu that appears.
When you do this, the green check mark (4) appears next to
“Speakers TASCAM UH-7000”.
NOTE
To use this unit as the recording device, open the Recording
page and use Set as Default Device for Line In TASCAM
UH-7000.
4. After completing the setting, click the OK button.
5. Start Windows Media Player, select an audio file and begin
playback.
NOTE
• If you change the setting while Windows Media Player is
running, the software will not recognize that the device has
been changed. In this case, restart Windows Media Player.
• If you still cannot hear sound after making the settings and
completing the procedures above, restart the computer.
• If you make this setting, sound will be output through this
unit, but no sound will be output by the computer’s speakers
or headphone jack.
• By default, the mixer pan settings are set to the center (C).
For this reason, sounds playing back will be heard as mono.
Adjust the built-in mixer settings as necessary. (See “MIXER
page” on page 17.)
• If you want the Windows Media Player output to be output
from this unit's DIGITAL (AES/EBU) OUT connector without
being affected by the mixer functions, on the MIXER page of
the Mixer Panel, select the Computer 1 and 2 button in the
DIGITAL OUTPUTS SELECT section.