Resetting the mixer settings, Using the unit as an a/d converter, 5 – mixer panel settings – Teac UH-7000 User Manual
Page 24
24
TASCAM UH-7000
5 – Mixer Panel Settings
Resetting the mixer settings
Follow these procedures to reset the settings on the MIXER
page.
CAUTION
After resetting, you cannot restore the previous settings.
1. In the menu bar, Click “File” on a Windows PC or click
“TASCAM UH-7000 Mixer Panel” on a Mac to open a
pulldown menu, and click “Mixer Reset...”
The following confirmation message will appear.
Windows confirmation message
Mac confirmation message
2. Click the “OK” button in the message window to reset the
mixer settings and related settings to their default values.
The items reset and their default values are as follows.
The following items on the INTERFACE page
o
Mixer Mode: Multitrack
The following items on the MIXER page
o
Dynamics effects: off
o
Dynamics effects assignment buttons: off
o
Effects send selection buttons (all channels): POST
o
SEND knobs (all channels): 0
o
SOLO buttons (all channels): off
o
MUTE buttons (all channels): off
o
Pan sliders (all channels): center (C)
o
Channel faders (all channels): 0 dB
o
LINK buttons (all channel pairs): off
o
Send effect: off
o
SEND knob: 127
o
RETURN knob: 64
o
Master fader: 0 dB
o
MON MIX slider: center
o
LINE OUTPUTS SELECT button: Master L and R
o
DIGITAL OUTPUTS SELECT button:
Computer 1 and 2 (Multitrack mode default value)
Master L and R (Stereo Mix mode default value)
NOTE
Click the “Cancel” button to return to the Mixer Panel
without resetting.
Using the unit as an A/D converter
You can set the parameter values on the Mixer Panel pages to
values that are useful when using this unit as an A/D converter.
1. In the menu bar, Click “File” on a Windows PC or click
“TASCAM UH-7000 Mixer Panel” on a Mac to open a
pulldown menu, and click “ADC Preset”.
The following confirmation message will appear.
Windows confirmation message
Mac confirmation message
2. Click the “OK” button in the message window to set the
parameter values on the Mixer Panel pages to values that
are useful when using this unit as an A/D converter.
The items and their values are as follows.
The following items on the INTERFACE page
o
Mixer Mode: Multitrack
The following items on the MIXER page
o
Dynamics effects buttons: off
o
Dynamics effects assignment buttons: off
o
Effects send selection buttons (all channels): POST
o
SEND knobs (all channels): 0
o
SOLO buttons (all channels): off
o
MUTE buttons (all channels): off
o
Pan sliders (all channels): center (C)
o
Channel faders (Analog 1/2): 0 dB
o
Channel faders (Digital 1/2): –∞ dB
o
Channel faders (Computer 1-4): –∞ dB
o
LINK buttons (all channel pairs): off
o
Send effect: off
o
SEND knob: 127
o
RETURN knob: 64
o
Master fader: 0 dB
o
MON MIX slider: Input
o
LINE OUTPUTS SELECT button: Master L and R
o
DIGITAL OUTPUTS SELECT button: Analog in 1 and 2
NOTE
After using this function, you can further change the
settings as you like.