Teac DR-V1HD - Manual (Page 87)

はじめに
はじめに
TASCAM DR-V1HD
87
12 – Troubleshooting
If you are having trouble with the operation of this unit, please try the
following before seeking repair. If these measures do not solve the problem,
please contact the store where you bought the unit or TASCAM Customer
Support.
Power will not turn ON.
Confirm that the batteries are not dead. e
Make sure that the batteries are installed with the correct e ¥ /^
orientations.
If using a TASCAM PS-P520 AC adapter (sold separately), confirm that its
e
plug is inserted securely into an outlet.
The unit does not function.
Confirm that the e HOLD switch is not set in the direction of the arrow.
Confirm that the unit is not connected by USB to a computer (unit e
display shows “USB Connected”).
The microSD card is not recognized.
Confirm that the microSD card is inserted completely. e
Playback does not work.
This recorder can only play mov files that it created. e
If you are trying to play a WAV file, confirm that the sampling frequency e
is supported by this unit.
No sound from the speaker.
Are headphones connected? e
Is the e SPEAKER switch set to OFF?
No sound from connected monitoring system.
Check the connections with the monitoring system. e
Is the volume of the monitoring system minimized? e
Is the OUTPUT LEVEL setting of the unit minimized? e
Recording (video/audio/photo) is not possible.
If you are using an external device, check the connections again. e
Check the input settings again. e
Confirm that the recording level is not too low. e
Confirm that the microSD card is not full. e
Confirm that the number of files has not reached the maximum that the e
unit can handle.
Input level is low.
Confirm that the input level setting is not too low. e
Confirm that the gain setting is not too low. e
Confirm that the output level of any connected external device is not e
too low.
The sound I am trying to record sounds distorted.
Confirm that the INPUT volume setting is not too high. e