Remote control of the unit from a smartphone, File transfer from the unit to a smartphone, File transfer from the unit to a smart- phone – Teac DR-22WL User Manual

Page 14

TASCAM DR-22WL

If using an Android device

1. Press the Wi-Fi button of the unit to make the Wi-Fi

indicator blink.
A pop-up message appears on the display.

2. You will be making a connection to a previously

connected smartphone, so press the F2

button.

3. The pop-up message on the display disappears and the

waits for a connection with a smartphone.

4. On your Android device, select “Settings” w “Wi-Fi”.
5. When you turn on Wi-Fi on your Android device, a Wi-Fi

device SSID list appears. Select the SSID shown on the

display of the unit.

6. A Wi-Fi connection between the unit and your smart-

phone is established and the Wi-Fi indicator is lit.

NOTE

The operation for Android devices explained above is

for smartphones. For details, see your smartphone’s

operation manual.

Remote control of the unit from a

smartphone

Since the dedicated application (DR CONTROL) has the same

display screen as that of the unit, you can operate the unit

by remote control with the application almost the same way

as operating from the unit. Before using the “DR CONTROL”

application, confirm how to operate the unit. That way, you will

be able to use the application smoothly.
1. When you have established the Wi-Fi connection between

the unit and your smartphone, start the “DR CONTROL”

application installed on your smartphone.

2. After starting the “DR CONTROL” application, the following

screen appears on your smartphone and you are able to

operate the unit by remote control.

For a detailed explanation of the “DR CONTROL” application,

see the “DR CONTROL Reference Manual”, which can be

downloaded from the TEAC Global Site (http://teac-global.

com/).

File transfer from the unit to a smart-

phone

1. Press the “Browse” button on the “DR CONTROL” screen.
2. The file list of the unit appears on the “Browse” screen.

Select a file to transfer.

3. A file details screen appears. Press the “Copy” button.
4. A file copy confirmation screen appears. When you press

the “YES” button, file transfer from the unit to the smart-

phone starts.