Super Systems 9130 Series - Manual (Page 65)

Series 9130 Operations Manual Rev - 64
Port Setup
Port setup is the communications definitions for the
controller. Please contact Super Systems Inc. for
more information regarding port setup. It is
strongly
recommended that none of the settings be modified
without technical support from Super Systems Inc.
Clicking on any of the values will display an input box
that will allow the user to modify the current
settings.
Slave Instrument Setup
** All devices on the same slave port must utilize the
same protocol
** An address of zero (0) will disable the
instrument** Some controllers (AC20 for example)
can provide dual functions (atmosphere and events)
and must have the same address assigned for both.
Clicking on the “Value” field for any instrument will
allow the user to select the slave instrument.
Instrument
This value will allow the user to select the slave
instrument type.
List of Instruments
The following is the list of instruments available as slave instruments:
SSi AC20
[T]Eurotherm 2500 SSi Quad AO2 Carbpro E v3.0
[A]Yokogawa 750 Unipro v3.5 SSi Quad AO3 Eurotherm 2500
[A]Honeywell UDC3300 Unipro v3.0 SSi Quad AO4 Ssi 8-8
[A]Dualpro LP1 Modbus [T]Carbpro v3.5 Slave Yokogawa UT350 SSi 9200 E
[A]Dualpro LP2 Modbus [T]Carbpro v3.0 Slave Yokogawa 750 Lp 2 Micrologix PLC
[A]Dualpro LP1 MMI 10Pro Yokogawa UP350 MCM Module
[A]Dualpro LP2 MMI Dualpro IN C Honeywell DCP551 PLC DF1
[A]Eurotherm 2404 [T]9200 LP1 Ascon 08 SLC DF1
[A]Eurotherm 2500 [T]9200 LP2 SSi X5 User 1