Super Systems 9130 Series - Manual (Page 22)

Series 9130 Operations Manual Rev - 21
 Slave Instrument Setup
 Zone Assignments
 Furnace Setup
 Default Wait Limits
 Alarm Setup
 Relay Assignments
 Analog Input Setup
 Analog Output Setup
 Alarm Polarity
 Event Hold/Reset
 Security
 Curve Entry
 Alternate PID Setup
 Aux Analog Input Setup
 Calibration
 Configuration
 A/I Module Offset Correction
 PV Switching
 T/C Correction Curves
 Generic Instrument Setup
 Tuning Assistant
 Analog Input Correction Curves
 Timer Setup
 Instrument Calculation
The SSi code of the day can also be used to log in to the menu system. No user name will need to be
entered when entering this code. Currently, the menu list is identical to the administrator-level list. The
SSi code of the day is typically used for in-house configuration prior to shipment. The code can only be
provided by Super Systems at 800-666-4330.
To select any of the menu options, highlight that item by clicking on it, and click on the Detail button.
The Return button will return the user to the default display screen.
Logs
The Logs screen will allow the user to view three
different types of logs – System, Alarms, and
Cycle.
Clicking on the button that displays the log type
(System Log, Alarm Log, or Cycle Log) will allow
the user to select the type of log file to view.
The green directional arrows will display the
previous items in the log or the next items in the
log, if the log items are longer than one screen.
The drop down list in between the directional
arrows will allow the user to select the date of the
log items to view.
The Return button will return the user to the
menu screen.