Super Systems 9130 Series - Manual (Page 30)

Series 9130 Operations Manual Rev - 29
Slave 1 Baud
This will set the baud rate for Slave 1 communications. The list of options is:
1200
14400 57600
2400 19200 76800
4800 28800 115200
9600 38400
Slave 1 Mode
This will set the mode for Slave 1 communications. This list of options is:
MMI
Modbus Master
Yokogawa
Modbus Host
Slave 2 Baud
This will set the baud rate for Slave 2 communications. The list of options is:
1200
14400 57600
2400 19200 76800
4800 28800 115200
9600 38400
Slave 2 Mode
This will set the mode for Slave 2 communications. This list of options is:
MMI
Modbus
ADAM
SSi Analog Input Board
Yokogawa
RS-232A Baud
This will set the baud rate for RS-232 communications. This is necessary if the Touchscreen will be
communicating through the Com ports. The list of options is:
1200
14400 57600
2400 19200 76800
4800 28800 115200
9600 38400
RS-232A Mode
This will set the mode rate for RS-232 communications. This is necessary if the Touchscreen will be
communicating through the Com ports. This list of options is:
Cal Term
Modbus
The Return button will return the user to the menu screen.