Super Systems 9130 Series - Manual (Page 32)

Series 9130 Operations Manual Rev - 31
 9200 LP3
 9100 LP2
 Eurotherm 2704 lp1
 Eurotherm 2704 lp2
 Eurotherm 2704 lp3
 VC BASE 1
 VC BASE 2
 VC BASE 3
 VC BASE 4
 AIPC
 SSi 7SL
 AEC Flow Board
 UMC800 Lp1
 SSi Quad AO1
 SSi Quad AO2
 SSi Quad AO3
 SSi Quad AO4
 Yokogawa UT350
 Yokogawa 750 Lp 2
 Yokogawa UP350
 Honeywell DCP551
 Ascon 08
This list of controllers includes the following Event Controllers:
 SSi AC E
 Yokogawa 750E
 Mod Mux
 Dualpro E Modbus
 Dualpro E MMI
 Carbpro E v3.5
 Carbpro E v3.0
 Eurotherm 2500
 SSi 8-8
 SSi 9200E
 Micrologix PLC
 MCM Module
 PLC DF1
 SLC DF1
The number below the list is the address for the slave instrument. The range 0 – 255.
** All devices on the same slave port must utilize the same protocol
** An address of zero (0) will disable the instrument** Some controllers (AC20 for example) can provide
dual functions (atmosphere and events) and must have the same address assigned for both.
The slave port is next to the address. The Slave port option can be: Slave 1, Slave 2, or RS-232.
The OK button will set the slave instrument, and the Cancel button will cancel the setup.
The Return button will return the user to the menu screen.