Super Systems 9130 Series - Manual (Page 112)

Series 9130 Operations Manual Rev - 111
Parameter Default Factory Setting Customer Setting
Setpoint lower limit, all -9999
Setpoint upper limit, all 29999
Event hold none
Event hold polarity all N.O.
Hold instrument none
Hold PV min 2000
Hold PV max 0
Event run None (-1)
Event reset None (-1)
Slave Instrument setups None
Zone Assignments None
Quench instrument Instrument 2
Quench events 6 speed, 7 end
Temperature default wait
limit 15
PV Switch Action None
IP address 192.168.0.200
IP net mask 255.255.255.0
IP gateway 192.168.1.1
Temperature mode Fahrenheit
Loop 1 setpoint 0
Loop 1 prop band 4.0
Loop 1 reset 0.1
Loop 1 rate 0
Loop 1 cycle time 60
Loop 1 auto/manual auto
Loop 1 integral preset 0
Loop 2 setpoint 0
Loop 2 prop band 4.0
Loop 2 reset 0.1
Loop 2 rate 0
Loop 2 cycle time 60
Loop 2 auto/manual manual
Loop 2 integral preset 0