Super Systems 9130 Series - Manual (Page 50)

Series 9130 Operations Manual Rev - 49
Configuration
This option will allow the user to set some general configuration settings.
The list of configurable items is:
 Log Maintenance
 Programmer Alarm Text
 Event Text
 Compact Database
 Communications Setup
 Datalogging Setup
 Recipe Configuration
 Product Activation
 Alarm Text
 Read/Write Data
Log Maintenance
This option will allow the user to purge, or delete, log files,
starting from a specific date. All log files from on or before
the selected date will be purged. The user can purge log files
from the Alarm Log, Event Log, or System Log.
Programmer Alarm Text
This option will allow the user to modify the text for
Programmer Alarm 1 – Programmer Alarm 99.
Programmer alarms are internal, non-modifiable
alarms that are triggered when there is a certain
condition in the 9130 programmer. Each alarm is
initially labeled by the text “User Alarm #.” However,
these labels can be changed to the operator’s
preference. To change the text displayed for an alarm,
open the Configurator program, open the Settings, and
select the controller to edit. Under Alarm Text, double
click any alarm number, enter the new text to be
displayed, and hit Ok. User Alarm 0 is not an alarm; it is used to turn off a user alarm. It functions the
same way as the acknowledge button.
Event Text
This menu option will allow the user to configure the text for the input and output events for the 9130.
Select whether to edit the Input events or the Output
Events.
Note – The list of events can take a few seconds
to load . The screen will refresh after the list has been
loaded. There are a total of 31 input events, and 47 output
events. Highlight the event to be changed and click on the
Edit button. This action will display the on-screen
keyboard, which will allow the user to modify the event
text. To save the changes to the event text, click on the
Save button. Clicking on the Return button will not save
any of the changes made.
Note – Clicking on the Save
button will not close the Edit Event Text screen .