Super Systems CAT-100 - Manual (Page 7)

CAT-100 Operations Manual
Super Systems Inc. Page 7 of 51
Part
Number
Item Explanation
13569 CAT-100 Complete Unit CAT-100 retail unit. Includes all
components in an assembled unit.
13497 Insertion Rod The rod used to properly insert the
steel wire coils into a carbon-
containing atmosphere. Typically,
the rod is inserted into the
atmosphere through an access port
on the furnace or other piece of
equipment.
20616 Cage Assembly for Insertion Rod The piece that attaches to the
insertion rod and surrounds the
steel wire coil
20767 Calibration Bridge The module used to perform a circuit
calibration on the CAT-100. See
Calibration section (page 23).
20753 Bag of 100 Coils Steel wire coils that are inserted into
a carbon-containing atmosphere for
testing purposes
NOTE: The % Carbon content of the
untested coils will be imprinted on
this bag. The Coil Factor will also be
printed on the bag.
30058 Emery Cloth (Fine Grade, 150 Grit) A cloth containing coarse material
used with the steel wire coil prior to
carbon analysis.
13564 Carrying Case Assembly Carrying case used to transport and
provide protection for the CAT-100
unit
34601 Hinged Standoff The long, thin metal standoffs on the
front of the unit that support it
34557 CAT-100 Handle Handle attached to the top of the
polycarbonate enclosure
32016 Battery Replacement battery for CAT-100
33018 Power Cord Power cord used with CAT-100
20759 Custom Foam Packaging Specially designed packaging
material used to protect the CAT-100
from damage during transport or
storage
20756 Enclosure The enclosure that covers the CAT-
100 unit
Table 1 - Replacement Parts List