Super Systems CAT-100 - Manual (Page 42)

CAT-100 Operations Manual
Super Systems Inc. Page 42 of 51
The second parameter is Current Download Group. This allows you to assign a group number to
the test data that will be downloaded when Download New Tests is clicked. In the main screen,
the Test ID will display a value based on the following formula when a Group Number has been
assigned to downloaded results: (Group Number * 10000) + Test Number.
The third parameter is Download Range Tests
(Figure 66). This option allows you to set a
range of tests that CAT-100 View will download
from the CAT-100 unit. The test number in the
“Start” field must exist in order for any values
to be downloaded in this range.
Figure 66 - Download Range Tests
"Input Range" option
View Furnaces (Figure 67). Selecting this
option will display the list of Furnace Names
that can be applied to a test result when the
test result is being saved on the CAT-100. The
Edit Furnace Names option allows you to
change a selected Furnace Name. There is a
maximum of 16 furnace names, each with a
maximum of 32 characters in the name.
Figure 67 - View Furnaces option
View Operators (Figure 68). Similar to the View
Furnaces option, this option, when selected,
displays the list of Operator Names that can be
applied to a test result when the test result is
being saved on the CAT-100. The Edit Operator
Names option allows you to change a selected
Operator Name. There is a maximum of 16
operator names, each with a maximum of 32
characters in the name.
Figure 68 - View Operators option