Sundance SMT384 - Manual (Page 42)

Version 1.4 Page 42 of 47 SMT384 User Manual
AD9510 Register 18 – 0x48.
For more details, refer to AD9510 datasheet.
AD9510 Register 18 – 0x48
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
1 Not Used
Default ‘00000000’
0 Not Used Set Function pin PD Synch PD all Ref Synch
Software
Synch
Select Synch
Enable
Default ‘0’ ‘00’ ‘0’ ‘0’ ‘0’ ‘0’ ‘0’
AD9510 Register 19 – 0x49.
For more details, refer to AD9510 datasheet.
AD9510 Register 19 – 0x49
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
1 Not Used Update
Registers
Default ‘0000000’ ‘0’
0 Not Used
Default ‘00000000’
PCB and Firmware Version Registers
The PCB and Firmware Version registers can only be read by the Host. These
registers indicate the PCB and Firmware versions of the SMT384.