Smithy Ez-Trol2 - Manual (Page 20)

LAUNCHING EZ-TROL II
BOOTING EZ-TROL II CONTROL SYSTEM
Most of time, you will need to turn on your machine when you launch the EZ-Trol II control system
software. To turn on your machine, please refer to your operator’s manual.
Step 1: Once the machine is turned on, push the control box on/off switch. The green power
indicator light should be on. Make sure that your monitor is plugged on the wall socket and is
properly turned on.
Step 2: Wait for the desktop screen to show up.
Figure 6.1 Booting up EZ-Trol II Screenshot
Step 3: Click on the APPLICATIONS tab on the upper left hand corner of the screen.
Step 4: A dropdown menu will show. Click on CNC.
Step 5: A new dropdown menu will appear and click on EMC2.
6
Step 3:
Step 4: Step 5:
14 | Toll Free 1-800-476-4849