Smithco Spray Star 1600P (sn 0979 – 0991) Parts & Service Manual - Manual (Page 127)

125
Accessories
15-363 FRESH WATER TANK PARTS LIST
TO BE USED WITH 1602P, 1604P AND 1607P
REF# PART# DESCRIPTION QUANTITY
1 HB-516-18-075 Bolt 5 /
16
- 18 x 3 /
4
4
HWL-516 Lockwasher 5 /
16
4
HW-516 Washer 5 /
16
4
2 HB-516-18-225 Bolt 5 /
16
- 18 x 2 1 /
4
2
HW-516 Washer 5 /
16
2
HNTL-516-18 Lock Nut 5 /
16
- 18 2
3 15-488 Wash Tank (includes all * items) 1
16-166 Hex Plug 3 /
4
2
4 15-486 Tank Bracket 1
5 HB-14-20-100 Bolt 1 /
4
- 20 x 1 1
HNTL-14-20 Lock Nut 1 /
4
- 20 1
6 15-487 Support Brace 1
7 HB-14-20-100 Bolt 1 /
4
- 20 x 1 1
HWL-14 Lockwasher 1 /
4
1
HW-14 Washer 1 /
4
1
8* 16-960 Spigot (part of 15-488) 1
9* 15-488-01 Cap (part of 15-488) 1
10* 15-488-02 Cover Assembly (part of 15-488) 1
INSTALLATION INSTRUCTIONS
1. Drill two 11 /
32
holes through both walls of left side panel and seat support tube as shown in drawing.
2. Remove drill screw from bottom edge, in middle of side panel. Run a 1 /
4
- 20 tap through this hole.
3. Bolt tank to tank bracket using four 5 /
16
- 18 x 3 /
4
bolts, 5 /
16
lockwasher and 5 /
16
washers.
4. Use Teflon ® tape on each of the 3 /
4
hex plugs and install into tank.
5. Bolt tank bracket to seat support tube where you drilled the two 11 /
32
holes.
6. Bolt up support brace to tank bracket and side panel, as shown.