Skutch Electronics TimeClockLE - Manual (Page 9)

9
Starting Date of Pay Period
This is the starting date of the pay period.
Allow Working Past 12 Midnight
This should only be checked when you have employees that work past 12 Midnight. At 12 midnight this
feature automatically punches OUT all employees that are clocked IN and then re-punches them IN for the
next day.
Company Info
This is the information that is shown on the main TimeClockLE punch screen. It is also printed out on all
reports. This feature allows you to customize the reports with your own company name.
Activity Log
The ACTIVITY LOG is used to record system activities that management needs to monitor. The log can be
viewed from the main Manager Mode form.
Adjustments of System Clock (Fixed)
For security reason this feature can not be disabled. This feature reports to the ACTIVITY LOG whenever
there has been an adjustment to the system clock of over 59 seconds.
Starting and Stopping of program
Enables a report to the ACTIVITY LOG whenever the TimeClockLE program has been started or ended.
Entering Manager and Administrator Mode
Enables a report to the ACTIVITY LOG whenever the Manager Mode and Administrator Mode has been
accessed.
Empty Activity Log
Erases all current entries in the ACTIVITY Log.
Auto Internet Clock Update
When enabled, TimeClockLE will automatically update the system clock with the National Standard Time
via the internet connection. This function is performed once every day at 2:15AM. For this feature to work
you must either have a dial up modem, or DSL/cable modem and an Internet Service Provider(ISP).
Internet Explorer must be able to access the Internet on the TimeClockLE computer for this feature to
function properly. If you have XP as your operating system, do not use this feature. XP can be set up to
perform this task itself.
NIST Time Server IP Address
This is the Internet address of the server that the clock updates are received from. From time to time
servers can stop functioning. In this case simply select a new server. When changing this address, you
MUST click the TEST button before the new address can be saved. Make sure that the TEST worked. Also
make sure that you add the proper OFFSET to make the test time reflect your local time. You can also enter
your own IP Address if you wish. You still need to click the TEST button.