Sierra Video SVG Multi-Viewer - Manual (Page 68)

SIERRA VIDEO
58
NTP timing means the analog clock and digital timer are set by the NTP Server through
the RJ45 interface. It supports Network Time Protocol (NTP). The IP address of NTP
Server should be configured in the same network segment as SVG, and configure the
“NTP Server” under the label of “Network.” Check the box “NTP,” the NTP timing function
is enabled, otherwise, not.
If you check the box “Local,” the analog clock and digital timer are controlled by the local
computer which also accesses the web browser control of the SVG through the RJ45
interface. There are two items required here. First, the local IP address of the web
browser computer should be configured in the same network segment as the SVG (first
three triplets of the IP address are the same, fourth must be different). Second, refresh
the web page after checking the box “Local” in order to submit the current time of the
computer to the SVG. The factory default setting of the timing mode is Local.
The SVG uses built-in battery-backup for its clock, so that the clock keeps timing when
the SVG is powered off. The battery-backed clock stores time for the GPS and LTC time
code, but not Local or NTP (assumes those sources always supply the time).
Upload Custom Picture
The background, logo, and UMD picture of each channel can be changed to a custom
one freely through this function.
The pictures to upload must be 32bits TGA format with Alpha channel.
The size of UMD is 720x60 pixels and the full background size is 960X540 pixels.
The amount of data for logo picture must be less than 500KB (also 32bits TGA format
with Alpha channel).
Channel Style
The Channel Style button is not currently supported and has no function.