Sierra Video SVG Multi-Viewer - Manual (Page 29)

SIERRA VIDEO
19
Configuration
Using the Web-Server
The SVG Multi-viewer system has a built-in web server, so users can easily configure it
by Internet Explorer (or other browser) when connecting the RJ45 interface of the SVG
with an Ethernet cable to a network and the browser computer.
First step
: Login to 192.168.1.76 to open the general web browser control. There are
several tab labels, which are System, Alarm, User, Network, and Help.
Default IP address: 192.168.1.76
Default user name: admin
Default password: 000000 (six zeroes)
Second step
: Go to 192.168.1.76/cbvt.html to open the TV Format web browser
control. The choices are PAL or NTSC. Select your preferred TV format. After any TV
format selection change, a system restart is required.
Third step - Configuration
: Go to 192.168.1.76/config.html to set the physical
configuration of the SVG, such as editing the names of input sources, setting single or
dual output screens, and setting the relative positions for the output screens (up/down,
down/up, left/right, right/left). Once configured, select Return To System or enter
192.168.1.76 to return to the System (Home) page of the web browser for operation and
further configuration of the SVG multi-viewer.
Note:
Examples in the following sections depict the dual output system. If you have a single output
system, configuration screens will only show “first screen.”
Chapter 3