Sierra Video SVG Multi-Viewer - Manual (Page 52)

SIERRA VIDEO
42
For example, if selecting channel D2, the audio signals on channel D2 are embedded into
the HDMI output signal, or monitored via VGA/Audio output module of main output card.
Choose Screen 2. And channels in the drop-down list are all located on Screen 2, and
then choose one of them. For the HDMI+HDSDI output card, audio signals from input
source, currently displayed on the selected channel, are embedded into HDMI output
signal of the slave output card. For the HDMI+VGA output card, they are monitored via
the audio output interface provided by VGA/Audio output module of the slave output card.
For example, if selecting channel B3, audio signals on channel B3 are embedded into the
HDMI output signal, or monitored via VGA/Audio output module of the slave output card.
Note:
Remote serial selection of the input channels to monitor has been added to only the HDHDMI
Output Module systems with software release V2.3715S and later.
See Section 4 Communication Protocols and the Audio Monitoring Selection pages near the end
of this manual.