Sierra Video SVG Multi-Viewer - Manual (Page 50)

SIERRA VIDEO
40
2. For HDMI+VGA output card, VGA and HDMI output resolution are configured at the
same time. The output resolution of HDMI signal is up to 1920x1200x60p.
1024x768x60p,
1280x720x60p, 1280x768x50p
1280x768x60p, 1280x1024x60p, 1360x768x60p
1366x768x60p, 1400x1050x60p, 1680x1050x60p
1600x1200x60p, 1920x1080x50p, 1920x1080x60p, 1920x1200x60p
HDSDI/HDMI Output Resolution
SDI
Output
For the HDMI+HDSDI output card, the HD/SD-SDI and HDMI interfaces both output the
same video signal at the same time. But the SDI output format differs from HDMI output
signal, which can be set independently. Embedded audio is the same for both outputs.
Choose the needed screen (Screen 1 or Screen 2), and choose output format of the
HD/SD-SDI signal in the drop-down list. (Screen 1 is connected with output interface from
the main output card and Screen 2 is connected with output interface from the slave
output card).
Note:
If the system is single output system, there is no slave output, that is, there is no virtual “Screen
2” on the web page.
Configurable output formats:
None, 576i 50/480i 60 (depends if PAL or NTSC), 720p, 1080i, 1080p
PAL/NTSC TV format is set on the CBVT.html web browser page:
IP: 192.168.1.76/cbvt.html
After any TV format selection change, a system restart is required.