Sierra Video SVG Multi-Viewer User Manual

Page 13

SVG MULTI-VIEWER

SVG

Frame Front Panel

Frame Back Panel

PS1/PS2 Lamps

: Indicators with blue lights for dual power supplies operating normally.

Reset Button:

HDMI/HDSDI Output Module systems only! This feature is not supported on VGAHDMI

output module systems.

Accessed through the very small hole on the front panel under the PS1/PS2 lamps.
This function restores the factory default for the IP address,username and password
(192.168.1.76, admin, 000000). Insert a push pin into the small hole, and press the
button until there is no picture from HDMI and HD/SD-SDI output (about 5 seconds).
Then please restart the device, using the default IP address, username and password.

Note

The models shown here and in the subsequent
sections are fully populated. In some cases,
these frames may be configured with more or
fewer modules.

Consult the rear panel serial number and model
number to verify your order and product.

The system you receive is customized for the size
& type requested at time of purchase from
Sierra Video