Sierra Video SVG Multi-Viewer - Manual (Page 6)

SVG MULTI-VIEWER
Cautions
 Use the proper AC voltage to supply power to the switcher. When installing
equipment, do not attach the power cord to building surfaces.
 Use only the recommended interconnect cables to connect the switcher to other
frames.
 Follow static precautions at all times when handling the equipment.
 Power this product only as described in the installation section of this manual.
 Leave the sides of the frame clear for air convection cooling and to allow room
for cabling. Slot and openings in the frame are provided for ventilation and
should not be blocked.
 Only an authorized Sierra Video technician should service the switchers. Any
user who makes changes or modifications to the unit without the expressed
approval of Sierra Video will void the warranty.
 If installed in a closed or multi-unit rack assembly, the operating ambient
temperature of the rack environment may be greater than the room ambient
temperature. Therefore, consideration should be given to installing the
equipment in an environment compatible with the manufacturer’s maximum
rated ambient temperature (TMRA).
 Installation of the equipment in a rack should be such that the amount of air flow
required for safe operation of the equipment is not compromised.
 Other connections between peripherals of this equipment may be made with low
voltage non-shielded computer data cables.
 Network connections may consist of non-shielded CAT 5 cable.
 Do not cover chassis ventilation slots or block enclosure openings.
FCC Notice
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at the expense of
the user.
The user may find the following publication prepared by the Federal Communications
Commission helpful:
“How to Identify and Resolve Radio-TV Interference Problems” (Stock number 004-000-00345-4).
Available exclusively from the Superintendent of Documents, Government Printing Office,
Washington, DC 20402 (telephone 202 512-1800).
Warning
Changes or modifications not expressly approved by the party responsible for compliance to Part
15 of the FCC Rules could void the user’s authority to operate the equipment.