Sierra Video SVG Multi-Viewer - Manual (Page 16)

SIERRA VIDEO
6
Notice
In order to avoid network traffic congestion, please do not submit parameters before the
last modification is applied.
In order to avoid loss of communication between a web browser and the unit caused by
continuous operations, please do your second operation after you have gotten the first
operation's result. Generally, it will take less than three seconds to get results after you
submit a command. The time is related with the monitor type. If the time is too long (over
7 seconds), there may be something abnormal with the hardware’s working status
(overheating for example), please wait.
Do not plug in HDMI connectors with power on.
Without technological guidance from Sierra Video, users are not permitted to remove or
insert the modules away from or into the chassis or debug the internal operation.
We do not undertake any obligation or responsibility for intentional damage to the SVG.
Built-in Web server to control the SVG easily by your computer's browser via Ethernet.
Please make sure IP address of SVG is in the same network segment as your computer
(first three triplets should be the same, the fourth must be unique).
Windows 2003, Windows XP, Windows Vista and Windows 7 are strongly recommended
with Internet Explorer web browser.
Before powering down the SVG, the user should click the "SAVE" button (on the lower
right of the web browser System GUI page) to store all current settings. Otherwise, you
may lose some data. The SAVE button stores all current parameters into Flash memory.
Users can also upgrade the system under the label “Network.” Before the upgrade, any
anti-virus software and firewall have to be closed to make sure that the upgrade data is
transmitted to SVG system. Power and network should not be cut off during upgrading.
Please set all channels to input inner Test signal without waveform display before an
upgrade. This will shorten the time to upgrade the system.
If the current output resolution of HDMI signal is not compatible with your monitor, you
can change the output resolution on the web browser.