Sierra Video SVG Multi-Viewer - Manual (Page 51)

SVG MULTI-VIEWER
41
Audio Monitor Output Select
The processing mode of audio de-embedding is different for the two different types of
output cards.
1. For HDMI+VGA output card
Audio is monitored via an independent Audio/Tally input module (mini-adapter) attached
to the VGA/Audio output module's VGA connector. The system can monitor two audio
channels from HD, SDI and HDMI signals, and one audio channel from analog composite
input signals.
2. For HDMI+HDSDI output card
Audio monitoring for a certain video channel is achieved by monitoring the embedded
audio from either the HDMI or HDSDI output signals.
A. When the input source is an HD/SD-SDI signal, four channels of HD/SD-SDI
audio can be embedded into the HDMI/HDSDI output signal.
B. When the input source is an HDMI signal, four channels of HDMI audio signals
can be embedded into the HDMI/HDSDI output signal.
C. When the input source is CVBS signal, one channel of the analog audio signal
can be embedded into the HDMI/HDSDI output signal via the Audio/Tally input
module attached to the CVBS input module.
Note:
If system is single output system, there is no virtual “Screen 2” on the web
Choose Screen 1. Available channels in the drop-down list are all located on Screen 1:
choose one of them. For the HDMI+HDSDI output cards: the audio signals from input
sources, currently displayed in the Audio Output Select menu, are embedded into the
HDMI output. For HDMI+VGA output cards, audio is monitored via the audio output
interface (mini-adapter) connected to the VGA/Audio output module's VGA connector.