Sierra Video SVG Multi-Viewer - Manual (Page 65)

SVG MULTI-VIEWER
55
Serial Port Settings
There are three functions provided by the SVG system via the RS232 interface:
RS232 timing (for clocks), TSL UMD & Tally and Template (Layout) Remote Control.
Here are a few steps to achieve these functions:
First, set the baud rate and parity. The baud and parity must be the same as the ones of
the RS232 devices such as TSL Tallyman.
Second, check the box "TSL,” “GPS,” or “Template” to enable this function. Only one
function can take effect at one time, as they share the same RS232 interface.
Third, for TSL UMD & Tally, choose “Serial Port” in the drop-down list under “UMD
Settings” of OSD Elements, then set the address for target channel to receive the data
from TSL Tallyman. GPS Timing and Layout Remote Control do not use this third step.
Note:
You can send multiple strings for TSL function (maximum is 10 strings simultaneously).