Sierra Video SVG Multi-Viewer - Manual (Page 20)

SIERRA VIDEO
10
Dual Output System
For a dual outputs display system, there are two output cards, which are main output
card and slave output card. See the picture above.
The main and slave output cards must be the same type (HDMI+HDSDI or HDMI+VGA).
Mixing of two different type output cards is not supported.
The dual outputs are both configured by the web browser at the same time via the
network interface (RJ45) on main output card. The default IP address is 192.168.1.76.
And the RJ45 interface on slave output card is invalid with no function (do not connect to
this RJ45 interface).
Dual outputs system can be configured to be single output system easily via web browser
Configuration page (IP: 192.168.1.76/config.html then delete the second channel).
Based on different quantity of input cards, the combination of SVG is described as
following (the +2 refers to the HDMI inputs on each the two output modules):
Qty of Output Cards Qty of Input Cards Combination
2 1 6 pictures (4+2) display system
2 2 10 pictures (8+2) display system
2 3 14 pictures (12+2) display system
2 4 18 pictures (16+2) display system