Sierra Video SVG Multi-Viewer - Manual (Page 17)

SVG MULTI-VIEWER
7
Input/ Output Rear Panel
Overview
Chassis of SVG series is 1RU frame with six slots. The top row from left to right contains
Slot A, Slot C and Slot D. The bottom row from left to right contains Slot S, Slot B, and
Slot M. See the picture above.
Table-module type allowed inserting into each slot
Slot Allowed Module Type Slot Allowed Module Type
M (Main) Output Card only B Input Card only
S (Slave) Input Card/Output Card C Input Card only
A Input Card only D Input Card only
Note:
For Slot M only allows inserting an output card.
For Slot S, when system is single output, it allows inserting an input card; when it is dual outputs,
it allows inserting an output card.
For example, when one input card is inserted into Slot A, up to four virtual channels can be
created from this input card as a channel group named group A. If there is no input card inserted
into Slot A, then there is no group A shown on the web browser page. This is the same for Slot B,
C and D. Input signals can be only displayed in the virtual channels which are created from the
same input card (any input on module A can be displayed on any of the four channels of module
A, any input on module B can be displayed on any of the four channels of module B and so on).