Sierra Video Ponderosa 3G Series Routing Switcher - Manual (Page 48)

SIERRA VIDEO
42
Input Module LEDs
Each input module has 5 Green LEDs located on the front edge of the board. The LEDs indicate
the status of the module’s voltage. All 5 LEDs must be lit for the module to operate properly. The
absence of any lighted LED indicates a failure of the module and the factory should be contacted.
Just behind the reset button there is a group of 6 LEDs used for de-bug purposes. The function of
the LEDs are described below.
LED Indication Normal condition Color
1 Transmit in progress Flickers On/OFF when data is transferred GREEN
2 Application has run ON GREEN
3 Boot program has run ON GREEN
4 Temperature out of range OFF RED
5 Voltage out of range OFF RED
6 Not used OFF RED