Sierra Video Ponderosa 3G Series Routing Switcher - Manual (Page 19)

PONDEROSA
13
Connecting To Video Devices
Video sources and output devices (such as monitors, or recorders) may be connected to the
routing switchers through the 75 ohm BNC type connectors located on the back of the unit. Keep
in mind that the output signal format will be that of the input signal format.
All signal connections that use more than one cable interconnecting between devices should be
of equal timing length (example: cables between a camera and the switcher should have the
same time delay).
Inputs are set for 75 ohm termination. Unused outputs do not need to be terminated.