Redundant power supplies – Sierra Video Ponderosa 3G Series Routing Switcher User Manual
Page 23

PONDEROSA
17
Redundant Power Supplies
If redundant power supplies are ordered, the frame will contain two complete power supplies with
health monitoring LEDs. If a power supply should fail the other power supply will automatically
take over.
If a non-redundant power supply system is ordered, the redundant power supply slot will contain
a power supply frame with only the fan and health monitoring LEDs. This is referred to as a “fan
sled”. The “Module power” LED will not be lit on the fan sled. The redundant power AC
connection need not be connected for units with non-redundant power supplies. The fan sled will
operate from the primary power supply.
The “Fault” LED (red) turns on if there is a fan failure.
This manual is related to the following products:
- Pro Series 64XL 1616 Series HD/SDI 3G Shasta HD Routing Switcher Shasta HD 88 HD Shasta HD 88 SDI 1601 Series HD/SDI Shasta HD Scanning Routing Switchers 1602 Series HD/SDI Shasta HD Routing Switchers 1602 Series HD/SDI Shasta HD Scanning Routing Switchers 1601 Series HD/SDI Dual Output Shasta HD Routing Switchers Pro XL Series 8 Pro XL Series 12 Alta Pro Series Tahoe 3232CAA Tahoe 32128V Lassen XL Series VS Lassen XL Series DE Lassen XL Series HD Lassen XL Series SDI Tahoe 3264VAA Tahoe Series 48 Tahoe Series 16 Tahoe Series 20 Shasta 88D Shasta 88E Shasta 1601D Shasta 1616D Tahoe Series 32 Shasta Series 16 Shasta Series 32 Pro XL Series 16 Pro XL Series 32 Viper Component Series Viper Composite Series