Seaward SafeCheck 8 - Manual (Page 39)

Barcodes
38
Barcodes
Barcode Scanner Specification
The Safe Check 8 Tester can be used with barcodes and barcode
scanners, readers or wands compatible with other Seaward PAT
testers. These connect to the serial (RS232) connector. The
required barcode reader / scanner configuration is as follows: -
Baud Rate:
9600
Start Bits: 2
Data Bits 8
Stop Bits: 2
Parity: None
Inter-character Delay: 20ms
When to use a Barcode Scanner
Barcodes are used to identify the product number. These are
usually in the form of a sticker secured to the in the ENTER
APPLIANCE DETAILS screen.
Desk Test n Tag Printer
The Safe Check 8 Tester has been designed to work alongside the
Desk Test n Tag System. The system enables connection to the
printer via the parallel port whilst using a barcode reader or tag/brain
cell reader in the serial port.
Guard Switch
The guard switch socket is provided for use as a safety interlock to
enable the user to comply with BS EN50191. The guard switch can
be opened at any time and testing will be interrupted to ensure the
safety of the user.
Beacon
As with the guard switch socket, the beacon socket is provided to
enable the user to comply with BS EN50191.